Gas booster pump is a piston type booster pump powered by compressed air. When the air is intake, the valve core of the booster pneumatic control valve is switched back and forth, and the piston of the booster pump is controlled to move back and forth at a very fast speed. With the increase of the output pressure, the reciprocating speed of the piston slows down until it stops. At this moment, the output pressure of the booster pump is stable, the energy consumption is the lowest, and all parts stop working. Regardless of the reason for the pressure drop in the pressure retaining circuit, the booster pump will actively start to compensate for the leakage pressure and maintain the pressure stability in the circuit. The pump body is made of aluminum alloy and stainless steel. The seals are imported. The maximum driving pressure is 8 bar.
Introduction to the Working Principle of Single Head and Single Effect Gas Supercharging Pump
The driving piston diameter of single-head and single-effect gas booster pump is 160 MM. The head parts of high-power pump all have exhaust self-cooling without additional cooling system. The booster pump of this system is mainly used in situations where the output pressure is high and the flow rate is not high.
Introduction of operation principle of double-head single-effect gas booster pump
In order to reach the required pressure, the gas inlet pressure of a double-ended single-effect gas booster pump needs to be pre-increased by a certain program. The pre-increased pressure varies with the maximum pressure reached. Aluminum alloy and stainless steel are used to make all the pumps in this system. The diameter of the driving piston is 160 MM, the driving pressure is less than or equal to 8 bra, and the maximum pressure can be increased to 80 mpa. Both pump heads are equipped with exhaust cooling without additional cooling system. Compared with single-head single-effect gas booster pump, the output flow is larger and the stability is higher. It is mainly used in situations where both pressure and flow are required and the intake pressure meets the requirements.
Introduction to the Operating Principle of Double-head and Double-effect Gas Booster Pump
Double-head and double-effect gas booster pump is very suitable for various high-pressure gas testing or as a simple high-pressure gas source, which can increase extremely low pressure gas to very high pressure. All the pumps are made of aluminum alloy and stainless steel. The diameter of the driving piston is 160 MM, the driving pressure is less than or equal to 8 bra, and the maximum pressure can be increased to 80 mpa. Both pump heads are equipped with exhaust cooling without additional cooling system.
This article is supported by gas booster pump. For more details, please click on our official website . We will provide you with satisfactory service wholeheartedly.