Air booster pump is a kind of plunger pump (piston pump). All the products are imported seals, aluminium alloy and stainless steel as raw materials. The production quality has reached the international advanced level.
The principle is to use low pressure gas to drive large area piston end to produce high pressure gas of small area piston end. With the increase of the output pressure, the reciprocating speed of the booster pump slows down until it stops. At this time, the output pressure of the pump is constant, the energy consumption is the lowest, and the components stop moving. The output pressure can be adjusted steplessly by adjusting the input pressure. It has the characteristics of high output performance and low cost.
The air booster pump is specially designed to deal with the shortage of partial compressed air pressure. This product does not need electricity. It has the characteristics of simple operation, high stability, reliable structure, continuous operation, long service life and convenient maintenance.
This product can make the ordinary compressed air output different times of pressure through self-pressurization, so as to complete the delivery of compressed air or simply produce a high-pressure compressed air source. It is widely used in various air pipes, injection moulds, hot runners, manipulators, pneumatic dispensing machines, CNC pneumatic clamp heads, cylinders, bottle blowers, various air tightness pressure testing, pneumatic fixtures and pneumatic equipment pressure lack of supercharging effect. The maximum driving pressure can reach 0.85 Mpa. In order to prolong the service life of the pump, it is suggested that the pressure be less than 0.7 Mpa.
The air supercharger system is suitable for the secondary supercharger under the condition that the pressure of the original compressed air source is not high enough and can not reach the normal operation condition. According to the working principle of the pneumatic pressure test installation imported from abroad, the air supercharging system adopts a gas supercharging pump with a supercharging ratio of 5:1 to stop supercharging. Its power source is compressed air of 0.3-0.8 Mpa, and its output pressure is 1.0-4.0 Mpa. The supercharging pressure can be adjusted steplessly, and the output pressure is stable and reliable. The air pressurization system is equipped with 40L high-pressure carbon steel gas storage tank, which can make the pressurized gas enter the gas storage tank to stop the pressure buffer function. When used, the stable and reliable output pressure can be obtained by regulating the pressure regulating valve at the outlet of the gas storage tank. Safe and convenient use, the system does not consume electricity, energy saving and environmental protection!
If you have more questions, please call or leave a message at . We will answer your questions in time.