Another name of duplex: air source processing duplex. So what role does it play in pneumatic pressurization equipment?
The filtration degree in the two-part pneumatic booster pump is generally 50-75 μ m. The pressure regulating range is 0.5-10mpa, and the filtering accuracy is 5-10 if required μ m，10-20 μ m，25-40 μ m. And the components with pressure regulation of 0.05-0.3mpa and 0.05-1mpa are called duplex components without pipe connection.
The duplex is an indispensable air source device in most pneumatic pressurization systems. It needs to be installed near the air equipment. It is the guarantee of the overall quality of compressed air and the important guarantee for the good operation of pneumatic pressurization products.
The installation sequence of the triplet is air filter, pressure reducing valve and oil mist according to the air inlet direction. The combination of air filter and pressure reducing valve can be called pneumatic duplex. Since the booster cylinder and drive cylinder of pneumatic booster products are separated, the oil mist inside the two conjoined bodies needs to be lubricated with lubricating oil to lubricate the drive cylinder. But it will not pollute the pressurized medium.
The pressure reducing valve can stabilize the air source, keep the air source in a constant state, and will not damage feiente dynamic pressurization products (the driving air pressure shall be ≤ 8.3bar), which can reduce the damage to the pneumatic booster pump or pressurization equipment due to the sudden change of air pressure of the air source. The filter is used to clean the air source. It can filter the water in the compressed air to prevent the water from entering the pneumatic booster pump with the gas, resulting in the decline of the service life of the pneumatic booster pump.
The oil atomizer can lubricate the driving part of the pneumatic booster pump and the lubricated parts, greatly prolonging the service life of the pneumatic pump.
It can be seen from the introduction that a small binary can bring a lot of benefits to the pneumatic gas booster, liquid booster pump and other products in your factory, and their price is not expensive. It is a wise choice to configure one.