Air booster pump, also known as gas pressure valve, is a small area of piston end high-pressure fluid driven by a large area of low-pressure gas at the piston end. It can be used for compressed air and other gases. The output pressure can be driven by stepless pressure regulation. Applicable to the original air pressure system, improve the working environment pressure.
The dense gas booster pump uses piston pump air as the power supply. When the inlet pressure pneumatic valve core is reciprocally switched, the reciprocating movement of the booster pump piston is manipulated to increase the output pressure at a very fast speed. The reciprocating speed of the piston slows down and finally stops. At present, the output pressure of the booster pump is stable, the energy consumption is the lowest, and part of the booster pump stops operation. No matter what causes the pressure drop of the retaining ring, the booster pump will start automatically. Supplement the leakage pressure and keep the loop pressure stable. The pump body is made of aluminum alloy and stainless steel, the seal part is imported, and the maximum driving pressure is 8 bar.
Gas booster pump is divided into pneumatic booster pump and electric booster pump.
The booster pump is sealed without leakage. Non sparking safety can be used for combustible gases. It is not recommended to pressurize the oxygen to 20MPa.
Electric booster pumps will pass through filters with slight air.
Current flow. Selection of plant environment with low pneumatic flow rate.
厂家为大家先容的相关内容，本文来源：Above is the related content introduced by the manufacturer of gas booster pump. The source of this article is .