What is a gas-liquid booster pump?
The working principle of the gas-liquid booster pump is similar to the pressure booster, which exerts very low pressure on the large-diameter pneumatic piston. When this pressure acts on a small area of the piston, a high pressure is generated. The booster pump can be operated continuously by a two position, five gas controlled reversing valve.
This paper introduces the gas-liquid booster pump and its application scope气液增压泵为哪种介质?
What kind of medium is the gas-liquid booster pump?
(1) Oil, kerosene, diesel oil and water containing 5% soluble oil.
(3) It is compatible with UHMWPE dynamic seal and synthetic rubber static seal with phosphorus resistant hydraulic oil and petroleum based solvent.
(4) Petroleum based solvents, chlorinated solvents, fluorinated solvents. Use methylethyl ketone, methylacetone, diacetone, ethanol and Freon 22.
(5) Skydrol and aerosafe hydraulic oils, acetone and some ethanol. EPDM (e.g. 51331-mdtv-5) can also be used for these liquids if used instead of synthetic rubber static seals.
(6) Deionized water.
Note: the dynamic sealing life of non lubricated type is significantly lower than that of lubricated type.