发布时间：2021-06-23 16:53:16 发布人：
The air booster pump, also known as the gas booster valve, is driven by the low-pressure gas of the large area piston end to produce the high-pressure fluid of the small area piston end. It can be used to compress air and other gases. The output air pressure can be adjusted steplessly by driving air pressure. It is used in the working environment where the original air compressor system needs to improve the pressure.
The gas booster pump is a kind of piston type booster pump with compressed air as the power source. When the air enters, the valve core of the booster gas control valve switches back and forth, and controls the piston of the booster pump to move back and forth at a very fast speed. With the increase of the output pressure, the reciprocating speed of the piston slows down until it stops. At this moment, the output pressure of the booster pump is stable, the energy consumption is low, and all parts stop working; No matter what causes the pressure drop of the pressure maintaining circuit, the booster pump will start automatically to supplement the leakage pressure and keep the circuit pressure stable. The pump body is made of aluminum alloy and stainless steel, the seals are imported, and the driving air pressure is 8bar.
The gas booster pump is divided into pneumatic booster pump and electric booster pump. The seal of the pneumatic booster pump is leak free. It is spark free and safe. It can be used for combustible gas. It is not recommended to pressurize oxygen to 20MPa. Because pressurization to 20MPa will also cause explosion. The electric booster pump will pass through the filter and discharge into the air slightly. If it is not in the sealed space, the electric booster pump can be used. The flow of electric flow is large, while the flow of pneumatic flow is small.